【BMD】BMCC供货问题的历次解释

freedomer123

过路人 发表于 2012-11-13 09:00
BMD虽然推迟发货日期，但是价格一直是稳定的，总比佳能C500还没上市价格就打八折好（原价21万），等F5/F55出 ...

机身怎么可能保值？看看RED MX就知道了

huangjun

让我想到了一个词：made in china

slayer1

过路人 发表于 2012-11-13 09:00
BMD虽然推迟发货日期，但是价格一直是稳定的，总比佳能C500还没上市价格就打八折好（原价21万），等F5/F55出 ...

请问5d3是哪卖1万7呢？是套机吗？要是套机省下钱还能换个电脑。兼顾便携性我本来犹豫bmd和5d3，但现在觉得买个牛x的机器不如买个靠普的机器，至少目前一个是在天上总是无法兑现的承诺约等于谎言，另一个在地上满街都是现货看的眼馋近在眼前，一般人谁会买量概念车开呢？就像默默唧唧好多年的暗黑三好玩个屁，本来在我眼里他们也都差不太多黑色一小陀掉地上就完，我不信这些差别能导致谁谁片子得不上奥斯卡。连万把快的玩意都搞不定的生产线，有点时间用来等他雄起？我打算5d3了，还是让我先走起吧。求5d3最便宜有货态度和蔼有美女北京销售门脸。

死神十三

Camera Shipping Update: 11/15

Hi,

Here is another update on the camera shipments.

Some good news. If you have read my other posts about the causes of the camera delays then you know we have been dealing with a problem with our sensor supplier related to contamination of the glass that's bonded on the front of the sensor. It's not been clean and so we had to stop production of cameras.

There have been two issues here we have been dealing with, the first that the sensor supplier has not been able to see the contamination because their tests were not good enough, and secondly that they need to find a way of bonding the glass on the sensor without contamination.

The good news is that we got a small shipment of sensors that the sensor supplier had tested with their new test setup and they were all ok when we built cameras with them. This is good because they will now be able to see sensors that are contaminated and not ship us anything that's unable to be used to build a camera.

Also, the sensor supplier has done a small run of sensors at the new company that's bonding the glass and they got almost a 100% pass rate, which is also great. This means they finally have a solution to bonding on the glass that looks like it will work.

The plan at the moment is to do a small production run this week and we hope to get those sensors next week where we can build cameras using them and see how it all goes.

But things are looking quite good. This run of cameras next week will test the sensor supplier's ability to build sensors without contamination and to also be able to test them correctly so we only get good sensors. If that's all ok then we look like we will be able to move back into production.

I will update everyone next week when we know. I also hope to have more info on how fast they can ramp up with this new supplier and the new test.

I hope this update helps.


Regards,

Grant
Blackmagic Design

终于有些好消息了……

5D2高清

不知道　这个TMD机子会不会跟维死它系统一样上来没多久　就回去打酱油去了

easeimage

现在强氧的消息是全价预定2月出货，如果不按时交货是不是可以告经销商，哈哈哈！

|.ＪΟｈаг

讠讠 发表于 2012-11-11 16:56
正是

大哥~BMCC 在哪里买得到？